TECHNET Archives

September 2003

TechNet@IPC.ORG
Options: Use Proportional Font
Show HTML Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Selective Edge Plating
From:
Wayne Pritchett <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 29 Sep 2003 08:08:44 -0400
Content-Type:
multipart/alternative
Parts/Attachments:
text/plain (1172 bytes) , text/html (1292 bytes) 




I succeeded with an adapter board like the one you describe.  I placed a
row of vias down each edge of the board, then we routed the board outline
right down the middle of the vias.

We did get some tearout of the vias, so I suggest that you leave a little
more than half of the via when you trim the edges.  Maybe put some pads on
inner layers to anchor the vias better.  Be sure and use a mild flux.

Wayne Pritchett


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
203-924-3170

ATOM RSS1 RSS2