Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wAMkd-000BiyC; Thu, 27 Mar 97 15:30 CST |
Content-Type: |
text/plain; charset=us-ascii |
References: |
|
Date: |
Thu, 27 Mar 1997 16:34:55 -0500 |
Precedence: |
list |
Reply-To: |
|
Resent-Sender: |
|
MIME-Version: |
1.0 |
Status: |
O |
X-Mailing-List: |
|
From [log in to unmask] Thu Mar 27 15: |
56:45 1997 |
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
X-Loop: |
|
Resent-From: |
|
Content-Transfer-Encoding: |
7bit |
Resent-Message-ID: |
<"ZZBf_1.0.ntI.lRkEp"@ipc> |
Subject: |
|
From: |
|
Old-Return-Path: |
|
Message-ID: |
|
Organization: |
Paragon Networks Int'l |
X-Mailer: |
Mozilla 3.01 (Win95; I) |
Parts/Attachments: |
|
|
Thanks John,
It obvious from the ratio of s/d the magnitudes of
the units don't matter as long as the units are the same,
but upon what are the units based -
inches, mils, millimeters...?
I assume that since we are dealing with wire it's mils?
John Nieznanski wrote:
> >From "High Speed Digital Design - A Handbook of Black Magic",
> by Howard Johnson and Martin Graham, 1993, Prentice-Hall, p. 186,
>
> Zo = 120 * ln (2s/d)
> --------
> sqrt(er)
>
> where, d = diameter of conductor
> s = separation between wire centers (s > d)
> er = effective relative permittivity
>
> For widely separated wires, use er = 1.
>
> For wire pairs with the insulation touching,
> use the er of the insulating material.
>
> Also, propagation delay (ps/in): 85 * sqrt(er)
************************************************************
-------------------------------------------------------
The comments and opinions stated herein are mine alone,
and do not reflect those of my employer.
-------------------------------------------------------
************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|