Sender: |
|
X-To: |
|
Date: |
Tue, 25 Mar 2003 11:38:27 -0500 |
Reply-To: |
|
Content-Transfer-Encoding: |
7bit |
Subject: |
|
From: |
|
Content-Type: |
text/plain; charset="iso-8859-1" |
In-Reply-To: |
|
Organization: |
EXFO-TO |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Seen that before... You should not use excessive solder (bending
stress)...see tdk...
http://www.component.tdk.com/components/commoncrackingmodes.pdf
jk
>-----Original Message-----
>From: TechNet [mailto:[log in to unmask]] On Behalf Of FOX, Ian (York Rd)
>Sent: Tuesday, March 25, 2003 11:37 AM
>To: [log in to unmask]
>Subject: [TN] Cracking Capacitors
>
>
>Technetters, have a little problem with capacitors that I'd be
>grateful for comments on. We've been wavesoldering 0805/1206
>chip caps onto the underside of both FR4 and poly/glass PCB's
>for the best part of 15 years and we've been experiencing a
>low failure rate of devices in-house after ESS and burn-in. On
>top of this however we've had some early life in-service
>failures. Process and assembly trials together with FEA
>analysis we've carried out suggests that the thickness of
>solder left on the topside of the device after the soldering
>operation is critical. Too much and the devices nucleate
>cracks relatively quickly, as during the negative part of the
>temperature cycle, the solders modulus increases to the extent
>that the stress imposed on the termination/body interface is
>in excess of that the titanate capacitors can withstand. My
>question to the forum therefore, is has anyone else found
>similar issues? I know we've seen posts before with regard to
>cracking caps, but this failure mode isn't anything to do with
>assembly stresses or thermal shock during the soldering
>operation (we've artificially increased the solder volume on
>convection reflow soldered components using dispensed paste
>and generated exactly the same failure
>mode)
>
>Regards
>Ian Fox
>Goodrich Engine Control Systems
>
>---------------------------------------------------
>Technet Mail List provided as a free service by IPC using
>LISTSERV 1.8e To unsubscribe, send a message to
>[log in to unmask] with following text in the BODY (NOT the
>subject field): SIGNOFF Technet To temporarily halt or
>(re-start) delivery of Technet send e-mail to
>[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE
>mailing per day of all the posts: send e-mail to
>[log in to unmask]: SET Technet Digest Search the archives of
>previous posts at: http://listserv.ipc.org/archives Please
>visit IPC web site http://www.ipc.org/html/forum.htm for
>additional information, or contact Keach Sasamori at
>[log in to unmask] or 847-509-9700 ext.5315
>-----------------------------------------------------
>
---------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
-----------------------------------------------------
|
|
|