Subject: | |
From: | |
Reply To: | Gregg A. Owens |
Date: | Fri, 16 Mar 2007 11:58:30 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Dear Werner:
MIT the university is in Cambridge, however us Master IPC Trainers are all around you....
Gregg
-----Original Message-----
>From: Werner Engelmaier <[log in to unmask]>
>Sent: Mar 16, 2007 11:53 AM
>To: [log in to unmask]
>Subject: Re: [TN] SMT Solder Joint Strength
>
>Hi Gregg,
>Last I looked MIT was in Cambridge.
>Solder joint strength is never the issue with a properly 'wetted' solder
>joint. Under sufficient force you will rip the soldering pad out of the resin
>matrix, but not separate the solder joint.
>The strength, or more accurately the yield strength, comes into the picture
>when thermal cycling, because the yield strength is highly
>temperature-dependent [as are almost all other properties of solder].
>When T-cycling leadless solder joints the cyclic stress range will be bounded
>by the yield strength of the solder at the prevailing T; the reason why
>compliant leads work is that they do not allow the stress range to come close to
>the yield strength=f(T).
>The high variability of lead geometries, and some of the above, make SJ
>strength standards impractical to say the least, and even if you could do it, what
>would you do with the information?
>What is much more important is the failure mode—either brittle interfacial
>showing there is something wrong with the SJ arrangement, or pad rip-out
>meaning the SJ is good.
>
>Werner
>P.S.: Bev, which part of the above do you disagree with?
>
>
>
>**************************************
> AOL now offers free email to everyone. Find out more about
>what's free from AOL at http://www.aol.com.
>
>---------------------------------------------------
>Technet Mail List provided as a service by IPC using LISTSERV 15.0
>To unsubscribe, send a message to [log in to unmask] with following text in
>the BODY (NOT the subject field): SIGNOFF Technet
>To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
>To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
>Search the archives of previous posts at: http://listserv.ipc.org/archives
>Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
>-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|