Sender: |
|
X-To: |
|
Date: |
Wed, 6 Aug 2014 17:56:08 -0400 |
Reply-To: |
|
Message-ID: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="US-ASCII"; delsp=yes; format=flowed |
MIME-Version: |
1.0 (Apple Message framework v753.1) |
Parts/Attachments: |
|
|
(1) 45 degree inclined crack with grain boundary sliding - some
kindly of cyclic stress due to possibly thermal expansion difference
between the module and board. (either a large chip, or multi-chip
stack on module side... compare to the board of cte of 17ppm or so
for example). The module must be very rigid or very flexable... -
look like rigid would be apply... just a guess.
(2) significant ppt of high melting phase prior to eutectic
formation, the solder ball material look like is off eutectic Pb/Sn
with reballing cooling at low rate. - weak structually speaking.
(3) the operating temperature and environment may got something to do
with it. - no info provided based on the email below.
just a guess.
jk
On Aug 6, 2014, at 2:48 PM, Chris Mahanna wrote:
> We see hundreds of cracked solder joints every year, but I can't
> say that I've ever seen one quite like this. I have some
> suspicions, but I'll keep them to myself, as to not prejudice the
> crowd.
> EDS maps are forthcoming.
>
> This is a caught in-the-wild field failure of a 48-pin BGA
> Reballed to SnPb
> ENIG on board side
> Ni barrier on component side
>
> http://stevezeva.homestead.com/45268-1.JPG
>
> http://stevezeva.homestead.com/45268-2.JPG
>
> http://stevezeva.homestead.com/45268-8.JPG
>
> Thoughts? And Thanks to Steve!
>
>
> Chris Mahanna
> President, Technical Manager
> Robisan Laboratory Inc.
>
>
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud
> service.
> For more information please contact helpdesk at x2960 or
> [log in to unmask]
> ______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|