TECHNET Archives

June 2001

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Content-Type:
text/plain; charset=US-ASCII
X-To:
Date:
Wed, 20 Jun 2001 18:13:49 -0500
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, Jack Crawford <[log in to unmask]>
Subject:
From:
Jack Crawford <[log in to unmask]>
Content-Transfer-Encoding:
quoted-printable
Sender:
Parts/Attachments:
text/plain (67 lines)
IPC-A-610C provides requirements for use of spacers.  See section 5.2.6.1 starting on page 5-13.  Jack

>>> [log in to unmask] 06/20/01 05:50PM >>>
Lou,

        Not sure how critical your spacing requirement is, but a wire
doesn't sound like a consistant height measurment assuming it can be held in
place. I know of a supplier of standoffs (Bivar, http://www.bivar.com/)
which has both permanent, i.e. leave on the assembly stanoffs and those
which can be washed away (I believe they are made from starch). I've used
both types successfully. Hope this helps.

Mike Di Giacomo
Process Development Engineer
WorldHeart Corp.


-----Original Message-----
From: Lou Hart [mailto:[log in to unmask]] 
Sent: Wednesday, June 20, 2001 6:21 PM
To: [log in to unmask] 
Subject: [TN] Spacers


TechNetters, our manufacturing people have asked me if it is OK to use
spacers to assure proper height of radial leaded components.  They have
been using short wire segments as temporary standoffs, which are removed
after wave solder.  The spacers would stay in place, so the customer would
see them.  I've contacted the customer's engineering for guidance, but
wanted to get TechNet input about the removable wires vs. leave-in-place
spacers.  Thanks for any comments.  Lou Hart

----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------

ATOM RSS1 RSS2