 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v3onK-0000RgC; Thu, 19 Sep 96 14:29 CDT |
| Encoding: |
56 Text |
| Old-Return-Path: |
<simon.ipc.org!uunet.uu.net!esseye!smtpgwy.si.com!Juanita_Zeinstra_at_sia-gr6> |
| Date: |
Thu, 19 Sep 96 15:15:45 EST |
| From [log in to unmask] Thu Sep 19 17: |
43:46 1996 |
| Precedence: |
list |
| X-Loop: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Resent-Message-ID: |
<"tw8Yk1.0.X-A.nyPGo"@ipc> |
| Subject: |
|
| From: |
|
| Resent-From: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
Keep the conformal coating -- with those temperature variances, you could have
big trouble with an uncoated board. That is unless you have a hermetically
sealed unit. What are you masking, mating connectors/board guides/adjustment
screws?
______________________________ Reply Separator _________________________________
Subject: Fwd: conformal coating
Author: [log in to unmask] at SMTPpost1
Date: 9/19/96 2:57 PM
---------------------
Forwarded message:
From: [log in to unmask] (Mark Sattel)
Resent-from: [log in to unmask]
To: [log in to unmask]
Date: 96-09-19 12:40:03 EDT
Sirs:
I am presently investigating the need for conformal coatings on our
printed circuit assemblies. Do you have any literature that discusses
the relative merits and disadvantages? To date, our company has
conformal coated 100% of our PCAs. But the cost of masking, spraying,
and unmasking are staggering. My first instinct was to eliminate the
coating except in high heat, high humidity environments. Our operating
environments vary from freezing cold to hot and humid. Any information
that you can supply will be greatly appreciated.
Sincerely,
Mark Sattel
Datron World Communications, Inc
304 Enterprise St.
Escondido, CA 92029
(619)747-1079 ext 208
FAX (619)747-2625
E-mail [log in to unmask]
***********************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
***********************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***********************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
