 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0t6NzW-0000GgC; Fri, 20 Oct 95 15:24 CDT |
| Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
| Old-Return-Path: |
<bergda> |
| Date: |
Fri, 20 Oct 1995 15:24:22 -0500 (CDT) |
| Precedence: |
list |
| Resent-From: |
|
| cc: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| X-Mailing-List: |
|
| From [log in to unmask] Sat Apr 27 15: |
09:44 1996 |
| TO: |
|
| Return-Path: |
|
| X-Status: |
|
| Resent-Message-ID: |
<"R5gAK1.0.yp9.0M0Ym"@ipc> |
| Subject: |
|
| From: |
|
| Resent-Sender: |
|
| In-Reply-To: |
|
| X-Loop: |
|
| Message-ID: |
<Pine.3.89.9510201505.D33449-0100000@ipc> |
| Parts/Attachments: |
|
|
IPC-RF-245 would be the Rigid/Flex equivalent. IPC-FC-250 would be the
1&2 sided spec. As far as the drawing, you might consider IPC-FC-249 for
1&2 sided design, MIL-STD-2118 for Rigid Flex Design and whatever
material specs (IPC-FC-241 for copper clad, FC-231 for base material and
FC-232 for covercoats and adhesives)
Hope this helps
Regards
***************************************************
David W. Bergman, Technical Director
IPC
2215 Sanders Road
Northbrook, IL 60062-6135
708-509-9700 x340 Phone
708-509-9798 Fax
email [log in to unmask]
***************************************************
On Fri, 20 Oct 1995 [log in to unmask] wrote:
>
> What is the equivalent spec. for flex circuits that IPC-RB-276 is for
> rigid printed boards?
>
> Also, what other IPC specs should be called out on the fab drawing?
>
> Thanks in advance:
>
> --------------------------------------
> Larry L. Pucket
> Sandia National Labs.
> Dept. 2784 MS/0624
> P.O. Box 5800
> Albuquerque, NM 87185-0624
>
> Email: [log in to unmask]
> Phone: (505) 844-1711
> Fax: (505) 844-7428
>
>
|
|
|
