TECHNET Archives

January 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
TechNet <[log in to unmask]>
Subject:
Re: Experience with No Clean Paste and No Clean Flux
From:
"Sauer, Steven T." <[log in to unmask]>
Date:
Thu, 14 Jan 1999 13:32:00 E
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, "Sauer, Steven T." <[log in to unmask]>
Parts/Attachments:
text/plain (22 lines) 
Hi Don,
What type of solder paste are you using (water borne or alcohol based)?
Amount and type of residue left on the assy after reflow?  Is this
residue flowing onto/into PTHs?  Have you processed the assembly with TH
only to baseline a best case?
This additional info will help in determining possible solutions.
 Thanks.

Steve

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2