Subject: | |
From: | |
Reply To: | |
Date: | Wed, 12 Mar 2014 11:47:29 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Todd - I don't know of any solder joint pull tests that have minimum
and/or typical values associated with the method. As you detailed, there
are a bunch of variables that can influence the measured tensile value
that you record for a given test. There are a number of investigations
that have published pull test data but it was used in a comparison mode -
a gold finished pin versus a palladium finished pin for a specific test
vehicle/cross head speed/specific diameter. One data source that might be
of use is the International Tin Research Institute Publication No. 656
which contains a wealth of shear and tensile data for several solder
alloys and test parameters. Most of that data is based on copper "ring and
plug" solder joints. Perhaps some of that data could be useful for your
efforts.
Dave Hillman
Rockwell Collins
[log in to unmask]
From: "MacFadden, Todd" <[log in to unmask]>
To: <[log in to unmask]>
Date: 03/12/2014 11:06 AM
Subject: [TN] Solder Joint Interconnect Pull Strength Tests -
Standards?
Sent by: TechNet <[log in to unmask]>
Is anyone aware of standards for conducting and evaluating lead pull
tests, and are there typical expected lead pull (or push) values for the
common interconnects (i.e., gull wing, castellation, BGA, chip cap
terminals, etc).
Perhaps there are too many variables -- e.g., type, finish, configuration
and size of the lead; solder type, etc. -- to establish standard pull
strength values. We've always just used relative comparison of values from
sample lots against controls, but I'm wondering if there are typical
expected pull strength values from industry we can reference.
I noted from MIL-STD-1580B: 10.1.1.2 Terminal strength. Perform a lead
pull strength test on all parts (two parts minimum) in accordance with the
applicable specification. But what is the "applicable specification" being
referred to here?
Thanks in advance!
Todd MacFadden
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
|
|
|