TECHNET Archives

October 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Mime-Version:
1.0
Sender:
TechNet <[log in to unmask]>
Subject:
Hot Bar Soldering
From:
[log in to unmask]
Date:
Tue, 6 Oct 1998 09:24:34 -0500
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset=ISO-8859-1
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, [log in to unmask]
Parts/Attachments:
text/plain (25 lines) 
     A recent SMT magazine contained an article on hot bar soldering.  I am
     searching for information on this process.

     1) Equipment and manufacturers
     2) Process
     3) Design Guidelines

     If anyone is currently using this process or has experience with it
     and could provide me with some information I would appreciate it.

     -David Bruni
     [log in to unmask]

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2