David-san:
There are several resin coated foil suppliers in the world.
Basically two different types of products are available.
B-stage only resin coated and B-stage/C-stage resin coated.
We know the example of B-stage only resin coated foil.
Resin thickness: 80 microns
Innerlayer copper thickness: 35 to 45 microns
Insulation thickness after lamination: 50 to 60 microns
The maximum resin thickness is 100 microns.
F.Kuwako
Mitsui Mining & Smelting Co.
----------
> 差出人 : David Arivett <[log in to unmask]>
> 宛先 : [log in to unmask]
> ﾀｲﾄﾙ : FAB:Laser vias
> 送信日時 : 1997年2月16日 4:54
>
>
>
> An article in the February edition of PCFAB talks about laser drilled
> micro-vias. It shows a multi-layer stack-up of two cores with pre preg in
> the center. The outer layers are formed with resin coated foil. My
question
> is: how thick is the resin on the foil? I am sure it must be at least 2
mils
> in order to have enough resin to encapsulate the inner layer circuitry.
What
> is the maximum it might be?
>
> David Arivett
> Cuplex Inc.
>
>
***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05
*
>
***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]>
*
> * with <subject: subscribe/unsubscribe> and no text in the body.
*
>
***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact
*
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]
*
>
***************************************************************************
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
