Sender: |
|
X-To: |
|
Date: |
Mon, 18 Sep 2006 06:53:09 -0500 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
quoted-printable |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="us-ascii" |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
The purpose of the D&P test method is to identify any partial/complete
fractures at Time Zero and/or at any sequence Rel Test or mfg. process.
We do this all the time and very normal. What criteria will be
assigned to the partial fractures and how many is acceptable.
Victor,
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Rudolph yu
Sent: Friday, September 15, 2006 1:22 PM
To: [log in to unmask]
Subject: [TN] Need help on a Dye & Pry test result
Recently I asked an outside lab to perform the dye & pry test on couple
failure assemblies. The heatsink was not removed from the PBGA prior to
the
dye application.
According to the result and pictures, the corner pads of the BGA
package
from both units were covered by the dye completely . An indication that
a
seperation was formed between the BGA package's pads and its original
solder
balls at that one corner after the SMT process.
Have anyone of you experienced this kind of defects in the past and what
could be the root cause of this phenomena? ( Poor plating from the IC
manufacturer? SMT reflow profile? PCB warpage? )
I have been in the industry for 10 years and have never seen thing like
this. Is it common??
Thanks
Ryu
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text
in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100
ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|