Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Fri, 21 Nov 1997 14:24:57 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I am interested in information and experience with solder for high
temperature applications. For this specific example, the unit is a ceramic
substrate with silver palladium pads. Temperature conditions are as
follows:
--Blob top cure is 3 hours at 130?C for three hours
--Thermal Shock: Un-powered temperature cycling from -40?C to 140?C, 30
minutes at each temperature, with a 10second transition time (goal is 1000
cycles)
--Powered temp. cycling, 95% humidity, from -40?C to 105?C with one hour
transition time, 3 hour dwell time for 1000 hours.
What is the best solder paste to use for this application (reflow process,
standard components)?
Some documentation recommends a high tin content (95%) but discussions have
suggested that at these temperatures the tin becomes brittle over time.
High lead content solders (88%) have been suggested, but these have such a
high reflow temperature (>300?C) that standard SMT components (SOIC's)
cannot stand these temperatures.
I appreciate any suggestions and information
Ed Holton
Hella Electronics
313-414-0944
[log in to unmask]
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|