Mime-Version: |
1.0 |
Content-Type: |
text/plain; name="MEMO 03/20/97 11:38:14" |
From [log in to unmask] Fri Mar 21 11: |
13:03 1997 |
Date: |
Thu, 20 Mar 1997 11:38:17 -0500 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"prKZG2.0.H9M.6NMCp"@ipc> |
Subject: |
|
From: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0w7khz-000BCtC; Thu, 20 Mar 97 10:28 CST |
Old-Return-Path: |
|
X-Loop: |
|
Message-Id: |
<5010400000836193000002L032*@MHS> |
Parts/Attachments: |
|
|
Classification:
Prologue:
Epilogue:
Specifying a thickness of Au of less than 10 microinches should leave you with
so little Au, that it will diffuse into the solder joint below the critical %
needed to ensure a reliable solder joint, without the need to pre-tin the leads
of the component.
Jim Herard
Quality Engineering
IBM Microelectronics
TechNet-request @ ipc.ipc.org
03-18-97 07:55 AM
To: technet @ ipc.org@internet
cc: ROLF.THUNSTROM @ JKP.dynamics.unisource.nl@internet, BO.ALPTEG @
JKP.dynamics.unisource.nl@internet, BO.DALSTROM @
JKP.dynamics.unisource.nl@internet
Subject: ASSY: Gold in the solder connection #2
[correction to my previus mail]
Hi friends,
In order to make high produceability in the soldering process of boards,
surface mounted, it is necessary to prepare the gold plated components before
assembly. This is stated in ANSI/J-STD-001, which does not allow any gold at all
on the component legs.
Is it, anyway, possible to specify a limit of gold thickness on the comp.
connections, below which it is not necessary to extract the gold before
soldering? Does anyone have a opinion about that?
Sven-Eric Backstrom
Ericsson Saab Avionics
Sweden
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|