Mike,
You can do Flowing Mixed Gas Test (FMG) for your application. The test was developed at Battelle Labs. Folks at www.contechresearch.com can run this test for you. You have to specify  your use environment. The test can be
made as severe or as benign as one wants ( corrosion is proportional to gas types, gas concentrations, temperature, humidity etc.)
============================
Mike Lang wrote:

> We make commercial grade electronics system and have had some applications which ride on cruise ships.  The environements for these applications is not exactly harsh, but salt exposure is still a question in our minds.
>
> I come from a defense contractor backround, and the salt fog testing we used there would be a bit overkill.  Anyone out there know of any less severe standards?
>
> Thanks,
>
> Lang
> x5046
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
> 847-509-9700 ext.5365
> ##############################################################

--
____________________________________
Regards,
Pratap Singh

Tel./Fax: 512-255-6820,
e-mail: [log in to unmask] or [log in to unmask]