Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Wed, 12 Nov 1997 16:46:30 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Once in a while you might need oven with longer and more zones. One time, We
had thick board, densely populated and had mirror image QFP's of big sizes.
In that case, we have to order reflow fixture to control the heat and to
prevent the falling of the already reflowed components. This fixture
(non-metal, high temp material) was kind of heavy and thus worked as a heat
sink too, meaning you may not be able to accomplish reflow on top side with
less # of zones as you have to increase the ramp-up rate very high to
achieve reflow within 5 zones.
You might find problem on thicker board (above .093") to achieve desirable
reflow profile for single reflow. There are some customers who pay more
attention to thermal profile. It is worth going for 7 zones.
re,
ken patel
At 07:41 PM 11/12/97 +0100, D. Terstegge wrote:
>Hello Technet,
>
>Does anyone know a good reason, besides the possibility of having a
>higher throughput-rate, to invest in a 7-heating-zone reflow oven (with
>forced convection) instead of a similar machine with only 5
>heating-zones ?
>
>Daan Terstegge
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>##############################################################
>
>
______________________________________________________
Ken Patel Phone: (408) 490-6804
575 Cottonwood Dr. Fax: (408) 490-6859
Milpitas, CA 95035 Beeper: (888) 769-1808
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|