Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Thu, 14 May 1998 08:45:43 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Why would you not use a quick turn prototype fabricator?
At 07:46 AM 5/14/98 -0700, you wrote:
>We received the following inquiry off our webpage.
>
>Any ideas out there?
>
>Lisa Williams
>IPC Staff
>Northbrook, IL
>www.ipc.org
>
>IPC Internet Feedback Form
>Name: Iosif
>Company: blank
>E-Mail: i [log in to unmask]
>
>Comments:
>
> The company I work for designs brand new stuff
>(in the electronic field). But there's a little
>problem which seems to be greater than just
>a little one. When we finaly have our designed
>(multiple-layered) board (in a computer file)
>ready, we have to stay idle for about a month
>until it is handled to us. So, what we are
>looking for is the following : A device (a whole
>machine maybe) attached to a PC, which can produce
>our board in (lets say) a couple of days,
>and which communicates with the most common
>designer's sofware. If you think you can be
>helpful in any way, please answer straight to the
>address given. Thank you for your time.
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>################################################################
>
>
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|