Sender: |
|
X-To: |
|
Date: |
Wed, 8 Mar 2000 21:45:29 -0000 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="iso-8859-1" |
Organization: |
Bonding Services & Products |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Stella you can't have coplanarity problem with a three legged device. So your problem lies in
other areas such as geometry of pad, solder volume, solderability, placement pressures and so
on.
Mike
----- Original Message -----
From: Stella Neyman <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, March 08, 2000 4:19 PM
Subject: [TN] Coplanarity
> Dear Technetts,
> I have one custom design three leg SMT component. Two side leads (which are
> pretty massive and one middle center post). These leads are designed to
> create butt joints.
> Drawing specifies 0.004" coplanarity for all three leads. We are using
> 0.007" stencil.
> Now $1,000 question. I am using my life line and asking audience to help me.
> It seems, that center post doesn't create good solder joint. There are
> cases, when it seats only 0.001" deep in the solder and may break easily.
> I cannot use more than 0.007" stencil due to other component packages. I
> don't want to touch up each solder joint after reflow.
> What would you recommend? Please advise.
> Sincerely,
> Stella
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
> the body:
> To subscribe: SUBSCRIBE TECHNET <your full name>
> To unsubscribe: SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> information.
> If you need assistance - contact Keach Sasamori at [log in to unmask] or
> 847-509-9700 ext.5315
> ##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|