 
| Sender: |
|
| X-To: |
|
| Date: |
Thu, 5 Sep 2002 10:40:08 -0700 |
| Reply-To: |
|
| Subject: |
|
| MIME-Version: |
1.0 |
| Content-Transfer-Encoding: |
quoted-printable |
| Content-Type: |
text/plain; charset="iso-8859-1" |
| From: |
|
| Parts/Attachments: |
|
|
When we built Class 3 we used tools calibrated regularly to guarantee that they're only capable of delivering
the specified torque. The hardware being manufactured itself isn't tested except in the design stage to verify that
the torque specification is right, and then only if it's a new application.
-----Original Message-----
From: Kathy Kuhlow [mailto:[log in to unmask]]
Sent: Thursday, September 05, 2002 10:03 AM
To: [log in to unmask]
Subject: [TN] Torque Inspections
I was curious how are torque requirements for hardware are being confirmed? If a particular piece of hardware has a torque requirement of 12in/lbs how would the verification of that piece of hardware be done? Do you use a torque driver at the same in/lbs or back off of the torque range or look for loose(gap only)?
TIA
Kat
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/html/forum.htm for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|
