TECHNET Archives

1995

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
PCB Pre Bake
From:
Robert Willis <[log in to unmask]>
Date:
08 Sep 95 15:31:21 EDT
Content-Type:
text/plain
Parts/Attachments:
text/plain (10 lines) 
If you buy a good quality board you do not need to bake the board. If your
problem is out gassing increase the through hole plating to a minimum of 25um.
Should be between 30-35um. If the problem is delamination the problem is the
bonding or the pre preg.
Bob Willis UK
Tel 01245b 351502
Fax 01245 496123

ATOM RSS1 RSS2