TECHNET Archives

August 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Phototool issues.
From:
Colin <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Fri, 7 Aug 1998 07:57:00 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (47 lines) 
If you are experiencing the stretch during the printing cycle, it could
well be that the glass of the exposure frame is getting too hot. Typical
outputs from these machine are around 7Kw power per lamp.
If it's during the developing through the ammonia machine, check the
temperatures inside the machine with the use of a thermocouple. I can't
remeber what the exact developing temperature is, but the data sheets
should tell you.
Hope this helps!

At 19:15 07/08/98 +0800, you wrote:
>     Dear technetters,
>
>     I am facing phototool lengthening problem on diazo films,most of the
>     time only 1 side of the phototool expands.I am not sure what to look
>     for or what actually causing the problem.Can anyone please advice.
>
>     Thanks in advance.
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe:   SUBSCRIBE TechNet <your full name>
>To unsubscribe:   SIGNOFF TechNet
>################################################################
>Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
section for additional information.
>For technical support contact Hugo Scaramuzza at [log in to unmask] or
847-509-9700 ext.312
>################################################################
>
>
>

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################

ATOM RSS1 RSS2