Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vItKw-0000QMC; Thu, 31 Oct 96 03:22 CST |
Old-Return-Path: |
|
From [log in to unmask] Fri Nov 1 16: |
57:34 1996 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"R8m6D3.0.pp9.j_6Uo"@ipc> |
Subject: |
|
From: |
|
Message-ID: |
|
X-Loop: |
|
Date: |
31 Oct 96 04:14:48 EST |
Parts/Attachments: |
|
|
Does anyone know the low voltage directive requirements for
fastening isolated TO-220 packaged FETs with their tabs at 240VAC
onto a heatsink that is earthed. The FETs are IRFI830G and
according to IR data are isolation tested to 2.5KV (60s at 60Hz).
Do I need an extra layer of insulation ie: SIL pads and nylon
washers and if so, at what clearances and voltage ratings?
Paul Ross,
Lizard Electronic Developments Ltd,
Cornwall, England.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|