Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vnRlr-0000alC; Thu, 23 Jan 97 10:12 CST |
Old-Return-Path: |
|
Date: |
Thu, 23 Jan 1997 10:28:26 -0600 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
From [log in to unmask] Thu Jan 23 14: |
33:39 1997 |
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"DGIjo3.0.yiE.3uuvo"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
X-Mailer: |
Novell GroupWise 4.1 |
Message-Id: |
|
Parts/Attachments: |
|
|
Let me clarify, my fabricator and I work very closily on any subject that
may cost us in time and/or money. Calling out 6011/2 would just cost me
time, so I will wait for the go-ahead from my fabricator. (I sooo NICE)
Dan
>>> Vera Payne <[log in to unmask]> Jan 23, 1997 11:45 am >>>
Dan,
Sorry, but I have to put my .02 cents worth in on this one....
Your PCB fabricator sounds like they think you don't have the capability =
to decide which spec is best for you. It reminds me of the Bruce =
Springsteen song that refers to "Blind Faith". =20
In all the years I have worked in a board shop as quality engineer, =
plating manager, and salesperson I have found it refreshing to have a =
customer know what I was talking about when I mentioned the IPC. For
= the most part, if we get a board that has been designed to meet the =
specifications that are called out on the print or their own internal =
documentation I want to celebrate! On the other hand, I've spent =
countless hours trying to help "educate" my customers to the industry =
standards for bare pcb's. But...it is NOT my place to "brainwash" my =
customers to my way of thinking.
As Mr. Bergman noted in one of his replies, our industry is changing at =
such a rapid pace that the specifications have to be updated to reflect =
those changes. The specifications are reviewed and updated by
MEMBERS = of IPC and leaders in our industry. I just received my IPC
Expo = catalog, and in almost all cases the program leaders are not
employed by =
IPC, but by people in the industry who are willing to take the time to =
share their knowledge to help us all.
We all have the choice to adopt a new revision or discard it. (Unless of =
course, you are a pcb fabricator and your customer calls it out!)
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|