Sender: |
|
Subject: |
|
From: |
|
Date: |
Mon, 26 Apr 1999 13:40:54 -0400 |
Reply-To: |
|
Parts/Attachments: |
|
|
I just picked up a copy of IPC-D-279 (July 1996) and noted two references to
moisture absorption that I need clarification on. On page 73, section E-1.5,
the second sentence reads "This phenomenon (delamination/package cracking)
normally occurs at ~220C. In extremely susceptible components, the threshold
temperature is expected to be lower than ~220C." On page 130 "IPC-TM-650"
section 4.2 paragraph 2., 220C is identified as the reference temperature
beyond which the moisture rating achieved by this test is not applicable.
1) What moisture rating would be considered "extremely susceptible"?
2) How does this rating correlate to the JEDEC A112-A rating that is
displayed on
the packaging of moisture sensitive components? Is it the same?
3) If a plastic component has a rating lower than this (i.e.. less
sensitive) and the
package temperature never exceeds 220C, is moisture absorption
irrelevant?
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|