Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="iso-8859-1" |
Old-Return-Path: |
|
Date: |
Thu, 10 Jul 1997 07:45:43 -0400 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
Content-Transfer-Encoding: |
quoted-printable |
Status: |
O |
X-Mailing-List: |
|
>From willli Thu Jul 10 06: |
36:16 1997 |
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
X-Loop: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wmHVv-000BjaC; Thu, 10 Jul 97 06:35 CDT |
Resent-Message-ID: |
<"eQD9J1.0.-TU.UaCnp"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Thu Jul 10 08: |
50:47 1997 |
X-Sender: |
|
X-Mailer: |
Windows Eudora Light Version 3.0.1 (32) |
Message-Id: |
|
Parts/Attachments: |
|
|
It is the same for our organisation, please do the same for me. If you
respond directly to the asker, please cc to me.
Thanks
>Date: Thu, 10 Jul 1997 08:22:34 +0200
>From: Jos Aarninkhof <[log in to unmask]>
>Reply-To: [log in to unmask]
>Organization: SPA Nedworks
>To: [log in to unmask]
>CC: [log in to unmask], [log in to unmask]
>Subject: PPM defect counting
>
>Hello there,
>
>We are in the middle of studying how to implement PPM in our
>organisation and are looking for all information which can help us to
>build a good system for defect counting.
>So please keep me posted about all reply's you get. All other
>information would also be welcome.
>
>Thanx,
>
>
>Jos Aarninkhof
>SPA Nedworks Almelo bv
>NetherlandsVickie Chapman wrote:
>>
>> Rick --
>>
>> Great question! I wish the industry as a whole would standardize on this! I
>> would be very interested in hearing what other replies you get back.
>>
>> We count defects basically the same way you do, but with some variations
>> depending on the defects were tracking:
>>
>> Solder defect rate:
>>
>> # of defective solder joints / total # of solder joints
>>
>> Placement defect rate or defective component defect rate:
>> # of defective placements or defective components / total # of
>> components
>>
>> Total process-related defect rate:
>>
>> (# of defective solder joints + # of placement defects) / (total
# of
>> solder joints + total # of components)
>>
>> Over-all defect rate:
>> (# of defective solder joints + # of placement defects + # of
defective
>> components) / (total # of solder joints + 2*(# of components))
>>
>> Since the "over-all" defect rate includes electrically defective
components,
>> each component has an additional opportunity to be defective.
>>
>> # of defective solder joints = the number of pins affected. If one whole
side of
>> a 60-pin QFP is shorted together, that's 15 defective solder joints.
>>
>> The exception is that if just two pins are shorted together, I suspect
this
>> just gets counted as 1 defect most of the time.
>>
>> If the QFP is misclocked, that's one defective placement.
>>
>> If the QFP has an internal defect, that's one defective component.
>>
>> -- Vickie Chapman
>>
>>
>>
>> On Wed, 9 Jul 1997 10:33:41 -0700 RICK VERNON wrote:
>>
>> > From: RICK VERNON <[log in to unmask]>
>> > Date: Wed, 9 Jul 1997 10:33:41 -0700
>> > Subject: PPM Defect Counting
>> > To: [log in to unmask]
>> >
>> > We count our defect opportunities as follows: one per component plus
>> > one per solder joint. A resistor would be three defect opportunities,
a 144
>> > pin QFP would be 145 defect opportunities.
>> >
>> > We count actual defects as follows: Tombstone part is one defect.
>> > Insufficient solder on one pad is one defect. Solder short between three
>> > legs of an SOIC is one defect. Skewed SOIC is one defect.
>> >
>> > I have concerns that we are presenting an artificially low PPM rate by
>> > counting defects this way. Others have concern that if we count defects
>> > the same way we create opportunities, the PPM numbers will be inflated.
>> >
>> > I'm looking for info on how others in the industry count actual
defects that
>> > affect more than one opportunity.
>> >
>> > Thanks. Rick Vernon, QA Manager [log in to unmask]
>> >
>> >
***************************************************************************
>> > * TechNet mail list is provided as a service by IPC using SmartList
v3.05 *
>> >
***************************************************************************
>> > * To subscribe/unsubscribe send a message <to:
[log in to unmask]> *
>> > * with <subject: subscribe/unsubscribe> and no text in the body.
*
>> >
***************************************************************************
>> > * If you are having a problem with the IPC TechNet forum please
contact *
>> > * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]
*
>> >
***************************************************************************
>> >
>>
>> ***************************************************************************
>> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>> ***************************************************************************
>> * To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>> * with <subject: subscribe/unsubscribe> and no text in the body. *
>> ***************************************************************************
>> * If you are having a problem with the IPC TechNet forum please contact *
>> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>> ***************************************************************************
>
>
>
-------------------------------------------------
Patrick Ducas
Process Quality Engineer
Matrox Electronic Systems Ltd
E-mail: [log in to unmask]
Tél:(514)969-6000 ext.2971 Fax:(514)685-3415
-------------------------------------------------
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|