TECHNET Archives

February 2014

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
IPC TechNet Forum <[log in to unmask]>, Brian Ellis <[log in to unmask]>
Date:
Thu, 20 Feb 2014 08:54:58 +0000
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, Graham Naisbitt <[log in to unmask]>
Message-ID:
Subject:
From:
Graham Naisbitt <[log in to unmask]>
Content-Transfer-Encoding:
quoted-printable
In-Reply-To:
MIME-Version:
1.0 (Mac OS X Mail 7.1 \(1827\))
Content-Type:
text/plain; charset="windows-1252"
Parts/Attachments:
text/plain (256 lines)
Hello everybody

Just let you know that I am watching intently. I guess the best approach is to discuss this at the Las Vegas meetings.

As regards Brian’s Microcontaminometer and the Contaminometer that we now manufacture to his original quality levels, we can do what Brian mentions but, the burning question is, what is the ideal condition for components against which we can make a measure.

If anyone has any questions let me know and I will do what I can to answer them.

Anyone want some water, we have plenty to get rid of?

Graham
Gen3 Systems

On 19 Feb 2014, at 15:48, Brian Ellis <[log in to unmask]> wrote:

> Joe,
> 
> Thanks for your interesting message. It may interest you to know that, when I developed the Microcontaminometer, I came across a severe problem. With just a few cubic centimetre of solution in the measuring circuit, how could I calibrate it? The lowest standard NIST solution is 1 microsiemens-centimetre. If I used this, I would have to measure accurately quantities in the order of picolitres, which would be an almost impossible task. It is not possible to use water as the standard solution solvent below 1 microsiemens-centimetre because the conductivity of the salt (potassium chloride) would be lost in the conductivity of the water. I therefore had to develop a standard solution with a much lower conductivity and which was stable. I succeeded with this, down to 0.001 microsiemens centimetre and I researched the characteristics, such as stability, temperature coefficient, linearity and so on fairly thoroughly. One major difference is that I used sodium chloride as the salt, because this was the equivalent used for ionic contamination testing. As you can imagine, I used an organic solvent as the major solute.
> 
> A few years later, one of my interlocutors informed me that they could no longer do ionic contamination testing because, following a fire, the company boss men decreed that no flammable solution could be used or stored in a plastic container; only metallic containers and pipework were permitted. This got me thinking and I did a number of experiments, based on the same solvent as I used in the test solution. This revealed itself, in a 50% mix with water, as being nonflammable, non-toxic and compatible with the constructional materials of our instruments with a sensitivity pretty similar to that of conventional IPA/water mix. Because of its low volatility, it had less odour than IPA and was consequently more stable, requiring practically no maintenance of the proportions of the solution.
> 
> The big question was whether this solution dissolved flux residues in a similar way to the conventional IPA/water solution. My tests, which were rather perfunctory, indicated that it did so for both water-soluble and rosin-based fluxes. At that time, no-clean fluxes and pastes, as we know them today, did not exist, so I have no idea as to whether this solution would be better than, equal to or worse than the conventional solution for these residues.
> 
> This work was done on a mandate by the company that originally acquired the rights for the Contaminometer, with whom I had a nondisclosure agreement. As a matter of legal precaution, I don't feel that I can disclose, at this stage, the composition of the solution. I have no idea whether the NDA has been passed to Graham Naisbitt and company but I am not taking the risk or, if it has, is it still valid, as I have signed nothing with him and the original agreement was dated 1991? Big question marks!
> 
> I have vaguely discussed this with Graham on a couple of occasions, assuming that they may be interested in exploiting it and he is the only one, other than myself, to know the composition of the solution. However, he seems reluctant to go ahead with it; I won't discuss this in detail but it may be a question that the solution costs more than the conventional one. It has one minor additional disadvantage but several advantages which I think some may consider more important.
> 
> I feel that this subject should be discussed in detail with Graham and that the work that I did should be in the public domain.
> 
> Best regards,
> 
> Brian
> 
> 
> 
> 
> 
> On 19.02.2014 15:37, jrusseau.precisionanalysts.com wrote:
>> Hello Brian,
>> 
>> I would certainly be glad to have your valuable input on developing
>> cleanliness methods.  Currently, we are considering adapting the
>> existing IPC ion chromatography method for printed boards to include
>> components.  We are also considering a completely different method for
>> components.  As you are well aware, the no clean fluxes pose some unique
>> challenges in that the old solvent mixture of 75% IPA and 25% DI water
>> really have little ability to bring many of those materials into
>> solution.  I have been after our group to look at studying other
>> solvents that might prove better, but many of my colleagues hesitate to
>> abandon the staple mix.  They simply want to modify the concentrations.
>> Alas, I won't bore you with the dilemma's of IPC meetings / discussions,
>> but would relish the opportunity to gain some additional insights that I
>> may be lacking personally and to help drive industry methods into a more
>> modern era.
>> 
>> Peace,
>> 
>> Joe Russeau
>> 
>> 
>> 
>> ----- Original Message ----- From: "Brian Ellis" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Wednesday, February 19, 2014 3:32 AM
>> Subject: Re: [TN] Cleanliness testing at component level
>> 
>> 
>>> In 1983, my now defunct company introduced the Microcontaminometer
>>> MCM-1 which what I claimed was the most sensitive conductivity meter
>>> in the world. The smallest tank was 26 x 26 x 5 mm, to take 1" wafers,
>>> DILs, SOILs, passive components (remember we were still mostly in the
>>> through-hole components era then, except for hybrids). It could
>>> measure a single diode, down to the most sensitive range of 0-1 µg/cm²
>>> eq. NaCl. A better description is on pp 317-9, if you happen to have
>>> my book. An improved MCM-2 with better software on a PC was launched
>>> in 1989. I guess I must have been ahead of my time by some 30 years or
>>> so because measuring component contamination has been a very silent
>>> subject up to now; I can't remember how many MCMs were sold but you
>>> could count the number on two hands, at least until I ceded the
>>> Contaminometer range to a third party in 1991 and I think they dropped
>>> the MCM range. I have no idea if Graham Naisbitt's company, which now
>>> has the rights to the know-how, is exploiting this niche market.
>>> 
>>> Guess Doug has inherited my titles of King of Kaka and Prince of Poo
>>> (actually, I know in Germany I was nicknamed the Reinigung Papst -
>>> Cleaning Pope, slightly more complimentary!). For the anecdote, a guy
>>> in the UK Ministry of Defence called our APL-5 aqueous cleaning
>>> machine the best solderability tester in the world; you just had to
>>> look at the components in the sump to see which ones weren't solderable!
>>> 
>>> As for discussing the subject within the IPC, I'm obviously far too
>>> old to participate actively in a committee and I am really well out of
>>> touch with modern components (I retired in 1997), but would be
>>> honoured to be able to help in the editing of any proposals. Modern
>>> technology would make this easy with e-mails and possibly Skype.
>>> 
>>> Brian
>>> 
>>> On 18.02.2014 22:53, Douglas Pauls wrote:
>>>> That's me, the Emperor of Effluvium, Duke of Dirt, Sultan of Schmutz,
>>>> the
>>>> Marquis of Mud ...........
>>>> 
>>>> As Joe indicated, cleanliness at the component level, or at least very
>>>> small sub-assembly is being examined.  Once IPC as an organization gets
>>>> its hands around how do you determine cleanliness at that level and give
>>>> some guidelines on what is desirable, then it can go into larger
>>>> specifications like J-STD-001.
>>>> 
>>>> Doug Pauls
>>>> 
>>>> 
>>>> 
>>>> From:   "Stadem, Richard D." <[log in to unmask]>
>>>> To:     <[log in to unmask]>
>>>> Date:   02/18/2014 02:34 PM
>>>> Subject:        Re: [TN] Cleanliness testing at component level
>>>> Sent by:        TechNet <[log in to unmask]>
>>>> 
>>>> 
>>>> 
>>>> Yes, the lack of component cleanliness requirements in IPC documents is
>>>> lacking. Are they covered in JEDEC standards? If so, I think there
>>>> should
>>>> be a reference within the IPC documents, especially those standards
>>>> dealing with cleanliness and contamination issues to the next level
>>>> (contagion). And no, I am not going to be a part of that committee, as I
>>>> am suffering sufficient filth unto today to keep me busy thereof. Maybe
>>>> Doug Pauls and Terry Munson? Those guys know dirt like nobody else.
>>>> 
>>>> -----Original Message-----
>>>> From: [log in to unmask] [mailto:[log in to unmask]]
>>>> Sent: Tuesday, February 18, 2014 1:56 PM
>>>> To: Stadem, Richard D.; [log in to unmask]
>>>> Subject: RE: Cleanliness testing at component level
>>>> 
>>>> Dean,
>>>> 
>>>> No, I agree with you completely.   I just don't see the specification
>>>> addressing component level.   I would like to see the words "component
>>>> level" added so that everyone sees it the way we do.
>>>> 
>>>> In my case, the pre-tinned component may be shipped back to me and
>>>> sit in
>>>> stock for a year before it is assembled onto a PWA which is subsequently
>>>> tested for cleanliness.
>>>> 
>>>> Phil
>>>> 
>>>> -----Original Message-----
>>>> From: Stadem, Richard D. [mailto:[log in to unmask]]
>>>> Sent: Tuesday, February 18, 2014 9:00 AM
>>>> To: TechNet E-Mail Forum; Bavaro, Phillip @ MWG - TW
>>>> Subject: RE: Cleanliness testing at component level
>>>> 
>>>> For me, the difference between components and assemblies is becoming so
>>>> blurred that it is very difficult to determine where the spec applies
>>>> and
>>>> where it doesn't.
>>>> Can you tell me that a PoP component consisting of 4 stacked miniature
>>>> pwbs that is soldered together using a special flux and laser as well as
>>>> standard solder and flux and touched up and cleaned in an in-line
>>>> cleaner
>>>> does not require the same treatment by the specification as the 36"
>>>> by 24"
>>>> supercomputer CCA that has 24 layers, 36 miles of copper traces,
>>>> weighs 45
>>>> lbs when populated with just 24 sockets?
>>>> Why?
>>>> 
>>>> -----Original Message-----
>>>> From: TechNet [mailto:[log in to unmask]] On Behalf Of Phil Bavaro
>>>> Sent: Tuesday, February 18, 2014 10:31 AM
>>>> To: [log in to unmask]
>>>> Subject: [TN] Cleanliness testing at component level
>>>> 
>>>> I have reviewed the J-STD-001 several times but still have a question
>>>> regarding a subcontractor who performs component level soldering
>>>> operations for Class 3 hardware.
>>>> 
>>>> 
>>>> If the subcontractor is performing a soldering operation, then
>>>> cleaning is
>>>> required to remove flux residues (this is not  a no clean flux
>>>> situation).
>>>> 
>>>> If the subcontractor is cleaning, then cleanliness testing is required.
>>>> 
>>>> The J-STD-001 does not really address the component level when it
>>>> comes to
>>>> the Post Soldering Cleanliness Designator (PSCD).
>>>> 
>>>> If a component is having its leads pre-tinned or a BGA being re-balled,
>>>> then is it defaulted to a C-22 PSCD?
>>>> 
>>>> My position is yes but I can see where there might be arguments against
>>>> this since the designator codes seem to speak to the assembly level and
>>>> not the component level.
>>>> 
>>>> My concern is that there is considerable time lag between when component
>>>> soldering operations are performed relative to the actual PWA process
>>>> which does get checked for cleanliness.
>>>> 
>>>> Any input is appreciated.
>>>> ________________________________
>>>>  This message and any attachments are solely for the use of the
>>>> addressee
>>>> and may contain L-3 proprietary information that may also be defined as
>>>> USG export controlled technical data. If you are not the intended
>>>> recipient, any disclosure, use or distribution of its content is
>>>> prohibited. Please notify the sender by reply e-mail and immediately
>>>> delete this message and any attachments.
>>>> 
>>>> ______________________________________________________________________
>>>> This email has been scanned by the Symantec Email Security.cloud
>>>> service.
>>>> For more information please contact helpdesk at x2960 or
>>>> [log in to unmask]
>>>> ______________________________________________________________________
>>>> 
>>>> ______________________________________________________________________
>>>> This email has been scanned by the Symantec Email Security.cloud
>>>> service.
>>>> For more information please contact helpdesk at x2960 or
>>>> [log in to unmask]
>>>> ______________________________________________________________________
>>>> 
>>>> 
>>>> 
>>>> 
>>>> ______________________________________________________________________
>>>> This email has been scanned by the Symantec Email Security.cloud
>>>> service.
>>>> For more information please contact helpdesk at x2960 or
>>>> [log in to unmask]
>>>> ______________________________________________________________________
>>>> 
>>> 
>>> ______________________________________________________________________
>>> This email has been scanned by the Symantec Email Security.cloud service.
>>> For more information please contact helpdesk at x2960 or
>>> [log in to unmask]
>>> ______________________________________________________________________
>>> 
>> 
>> 
> 
> ______________________________________________________________________
> This email has been scanned by the Symantec Email Security.cloud service.
> For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________

ATOM RSS1 RSS2