 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset="us-ascii" |
| Old-Return-Path: |
|
| Date: |
Tue, 8 Jul 1997 07:19:46 +0300 (IDT) |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| From [log in to unmask] Tue Jul 8 08: |
36:43 1997 |
| X-Sender: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Loop: |
|
| Resent-Message-ID: |
<"7gSQW.0.-0K.hsRmp"@ipc> |
| Subject: |
|
| >From willli Mon Jul 7 23: |
10:33 1997 |
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wlRbY-000BjYC; Mon, 7 Jul 97 23:10 CDT |
| From: |
|
| X-Mailer: |
Windows Eudora Light Version 1.5.2 |
| Message-Id: |
|
| Parts/Attachments: |
|
|
We need some basic information on application of ultrasonic vibrators for
vertical , racks operated PTH line . We are plating 0.25 , 0.30 and 0.35 mm
via holes . Desmear process is applied off PTH line . In some of small via
holes we found round , circular voids in the center of the hole . It looks
like typical void created by air bubble . We have allready pneumatic
vibratotrs in the PTH line , but we intend to install ultrasonic vibrators
in the conditioner , which is the first solution in the line . The questions
are :
1 ) Power ( watts ) per plated area ? Does it depends on hole size and
board thickness ?
2 ) Recommended frequencies ?
3 ) What is the recommended distance between the transducer and the boards?
4 ) What percentage of the energy actually reach the center of the hole ?
How distance between the transducer and the board affect the amount of
ultrasonic energy that actually reach the board ?
All practical recommendations will be appreciated !
Edward Szpruch
Eltek Ltd - Israel
Tel 972 3 9395050
Fax 972 3 9309581
E-mail : [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
