Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0w2HVk-0007zbC; Wed, 5 Mar 97 08:17 CST |
Old-Return-Path: |
|
Date: |
Wed, 5 Mar 1997 16:25:56 +0300 |
Precedence: |
list |
Resent-From: |
|
X-Lotus-Fromdomain: |
MARTIS |
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
From [log in to unmask] Wed Mar 5 15: |
25:17 1997 |
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"IZYDR.0.CqD.22O7p"@ipc> |
Subject: |
|
From: |
|
TO: |
|
X-Loop: |
|
Resent-Sender: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
What kind of flux are you using ? Boards may be oxidized. Try a more
aggressive flux.
Brs, Johannes
I have a serious problem on some of the board that stucked in the store.
All of them is at least 2 years.
When I wave-soldered the bare board, it has a lot of blow-holes, solder
balls, pin-holes.
Anyway, I try to purge all of them, but there are 6000 pieces in the Store.
I try to bake at at 100 deg. C for 4 hours. Too bad, it doesn't work.
I try to bake for any 4 hours just before wave-soldering. The result is
terrible. Not even a slight Help !!!
Can anybody give me some advises what should I do ???
Thanks in Advance
Poh ..
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|