Sender: |
|
X-To: |
|
Date: |
Wed, 22 Mar 2000 15:01:35 EST |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="US-ASCII" |
From: |
|
Parts/Attachments: |
|
|
Hi
In a message dated 03/22/0 15:32:35, [log in to unmask] writes:
>My experience with UV curable glue in HALT has not been favorable. It
>will probably work fine in most applications, but crack when put through
>extreme temperature. I'm not telling you to back off on the what works
>for you, however, we had to go away from it because we conducted HASS on
>100% of our products and was not reliable after HASS. We switched over
>to E6000 (brand name) which could take the extremes. E6000 requires a
>longer cure time which caused more problems for manufacturing than UV
curable,
>but we were more worried about reliability than making product faster in
>production.
People think that HASS and HALT are magic bullets--HIGHLY ACCELERATED=HIGHLY
DESTRUCTIVE. For most electronic assemblies these HA/HA (bun fully intended)
tests a misleading, overly destructive, and have the effectiveness of a
'security blanket' (security blankets keep the goblins away, and my grandkids
swear that it works).
Werner Engelmaier
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Keach Sasamori at [log in to unmask] or
847-509-9700 ext.5315
##############################################################
|
|
|