TECHNET Archives

September 2016

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
TechNet E-Mail Forum <[log in to unmask]>
Date:
Tue, 20 Sep 2016 17:12:25 +0000
Reply-To:
TechNet E-Mail Forum <[log in to unmask]>, [log in to unmask]
Message-ID:
Subject:
From:
John Burke <[log in to unmask]>
Content-Transfer-Encoding:
quoted-printable
In-Reply-To:
Content-Type:
text/plain; charset=UTF-8
MIME-Version:
1.0
Parts/Attachments:
text/plain (19 lines)
Clearly you have never seen a BGA with one HIP joint?


Get Outlook for Android



From: Stadem, Richard D.

Sent: Tuesday, September 20, 10:07 AM

Subject: Re: [TN] J-STD-001 Space Addendum

To: TechNet E-Mail Forum



Why in the world are you thinking that each termination requires an individual X-ray? There is no reason for that. -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Jose A Rios Sent: Tuesday, September 20, 2016 11:33 AM To: [log in to unmask] Subject: Re: [TN] J-STD-001 Space Addendum 6012 for example, does have different sampling allowances at different c=0 rates, depending on the attribute being evaluated. Independent of the sampling rate, my original question was more 'what does the 001 Space Addendum require'. It says to examine hidden solder joints by X-Ray, not debating that, it just doesn’t state the extent. So if you have 300 hidden solder joints on a PWA, would 001 require you do to 300 X-rays….. per PWA. Thats what I was trying to gage. I should’ve also asked to respondents to state whether they are suppliers or users, to try to balance the responses in the absence of a clear direction. Thank you all…. > On Sep 20, 2016, at 12:20 PM, Mattix, Dwight wrote: > > Tru dat. > > > These days, does anybody actually apply dynamic changes to sampling rates based on changing levels of conformance? E.g. the old Mil-Std-105(?) sampling plan standard? > > -----Original Message----- > From: Jose A Rios [mailto:[log in to unmask]] > Sent: Tuesday, September 20, 2016 9:14 AM > To: TechNet E-Mail Forum ; Mattix, Dwight > Subject: Re: [TN] J-STD-001 Space Addendum > > What I meant is that when placing replicate devices from the same lot across a pwb during assembly, the cleaning, the paste screening process, reflow process, etc is common to that pwb, hence lending itself to sampling. > >> On Sep 20, 2016, at 11:45 AM, Mattix, Dwight wrote: >> >> Re: "...the processing of the board is the same for the entire PWA??" >> >> Is that the only factor to ponder? >> It would seem to be a first order effect to be sure. >> >> What about other inputs? E.g. >> Variability in surface factors affecting wetting: >> - solderable finish variance from pwb to pwb? >> - Variability in surface cleanliness from pwb to pwb, different lots of pwbs >> - variability in component lead's finish and wettability, different component lots >> >> >> -----Original Message----- >> From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D. >> Sent: Tuesday, September 20, 2016 6:20 AM >> To: [log in to unmask] >> Subject: Re: [TN] J-STD-001 Space Addendum >> >> Agreed. The cost is neglible. >> >> -----Original Message----- >> From: TechNet [mailto:[log in to unmask]] On Behalf Of John Burke >> Sent: Monday, September 19, 2016 7:00 PM >> To: [log in to unmask] >> Subject: Re: [TN] J-STD-001 Space Addendum >> >> Xray every one of them. >> >> Best regards, >> >> John Burke >> >> >>> On Sep 19, 2016, at 2:52 PM, Joey Rios wrote: >>> >>> Sections 7.5.14, 15 and 16 outlines inspection of hidden solder joints, invoking the use of X-Ray in the Space Addendum. The standard does not explicitly prescribe a sampling extent, so, if an assembly has dozens of the same device, like 50-100 say of such devices (such as a bottom termination component) on a single PWA, is the expectation (J-STD intent) that each of the replicate devices are inspected by X-Ray?? Is that what the industry practices, or is sampling commonly invoked, since the processing of the board is the same for the entire PWA?? > 

ATOM RSS1 RSS2