Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 24 Feb 1999 15:52:24 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
A good place to look for this kind of information is ANSI/IPC-PC-90 General
Requirements for Implementation of Statistical Process Control which is
available from the IPC. Page 5 defines Cpk as equal to the min of CPL,CPU
where CPL is process performance related to lower specification limit and
CPU is process performance related to upper specification limit.
I have seen this also defined as a ratio that compares the width of the
tolerance to the capability or spread in the output of the process taking
into account any lack of centering..
> -----Original Message-----
> From: Anna Miracle [SMTP:[log in to unmask]]
> Sent: Wednesday, February 24, 1999 1:14 PM
> To: [log in to unmask]
> Subject: [TN] Cpk Question
>
> Ancillary subject, but I know somebody out there can enlighten me. Does
> anyone
> know what cpk means besides "process capability index"? Does "cpk"
> actually
> stand for something?
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC's web site (http://www.ipc.org) "On-Line Services"
> section for additional information.
> For technical support contact Hugo Scaramuzza at [log in to unmask] or
> 847-509-9700 ext.312
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|