>From willli Tue Jul 22 11: |
34:56 1997 |
Content-Type: |
text/plain; charset=US-ASCII |
Old-Return-Path: |
|
Date: |
Sat, 22 Feb 1997 09:48:15 -0800 |
Precedence: |
list |
From [log in to unmask] Thu Jul 24 18: |
19:51 1997 |
Resent-Sender: |
|
Content-Transfer-Encoding: |
7bit |
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
X-Loop: |
|
Resent-From: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wqhtV-000BkFC; Tue, 22 Jul 97 11:34 CDT |
Resent-Message-ID: |
<"4knKz3.0.hhG.S4Erp"@ipc> |
Subject: |
|
From: |
|
Mime-Version: |
1.0 |
Organization: |
Unregistered version of SpikeMail |
X-Mailer: |
SpikeMail 3.10 |
Message-Id: |
|
Parts/Attachments: |
|
|
EFD does have the type of item you're looking for in their catalog and can
be contacted at:
800-556-3484 or 401-434-1680; in East Providence, Rhode Island
----------
------------------------ INTERNET MAIL ------------------------
From: "Dhawan, Ashok CA-WINPO2" <[log in to unmask]>
Subject: FW: Solder Dispensing Valve and Controller
Date: Fri, 18 Jul 97 01:07:00 GMT
---------------------------------------------------------------------------
you may try EFD or I & J Fishcher for spares on dispensers. Any body who
can
provide contact no for EFD.
The internet address for I&J Fisnar is www.IJfisnar.com
----------
From: Miguel Apezteguia
To: [log in to unmask]
Subject: Solder Dispensing Valve and Controller
Date: Monday, July 14, 1997 6:50PM
To Whom It May Concern:
I am a graduate student doing research into solder dispensing
systems. I would like to design and build a system that does the
dispensing and pick and place at one station, with one robot. I am
trying to find companies that specialize in dispensing technology in
order to buy a valve and its controller capable of dispensing a dot
10-12 mils.
I have contacted several of the larger companies, (Asymtek, Camelot),
but they will only sell the entire dispensing machine, with a minimum
price of $40,000, on the low end. I don't need the gantry, stepper
motors and everything else that they come with, just the valve and the
controller to interface with my robot.
I was given this email address, from an individual at a solder
manufacturing facility, as a great place to begin. If you have any
information or know of any companies that specialize in these valves I
would appreciate any information that is available.
Sincerely,
Miguel Apezteguia
ph: 801-356-3672
fax: 801-378-7575
post: 435 CTB
Brigham Young University
Provo, UT 84604
email: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|