We have a customer with this capability.

     Lenthor Engineering
     1506 Gladding Court
     Milpitas, CA 95035

     Tel: (408) 945-8787
     Fax: (408) 945-0347

     Contact: Jerry Smith



     There are quite a few mil-spec shops that could do this for you.

     Andrew P. Magee - Applications Engineer
     Rogers - Circuit Materials Unit
     Tel: (602) 917-5237
     Fax: (602) 917-5256
     E-Mail: 7403202@mcimail


______________________________ Reply Separator _________________________________
Subject: Rigid Flex Referral
Author:  StephenJ (Steve Joy) {NAME:Steve
Joy|EMS:INTERNET|MBX:[log in to unmask] at MCIMAIL
Date:    9/7/95 1:21 PM


I am looking for a shop that is capable of building a rigid flex with the
following criteria:  10 layers/L4-5 flex; .003/.003" on the flex;
005/.005" on the epoxy; ~2000 holes- mostly .0135"; about 9" X 14" with
3 flex legs off the main board.

Thanks,
Steve Joy