While wave soldering the mixed technology boards I am facing the problem of
icicles being formed on the solder side. The icicles are only on SMDs
(capacitors and resistors, there are no other SMDs)  while not observed on
lead thru components. The machine parameters are:
   Bath temperature: 245 deg C
   Conveyor speed: 1m per minute
   Fluxing thru foam fluxer
   PCB temperature before soldering: 100 deg C
   Preheat zone length: 1.5 m

The problem got solved by heating the boards at 60 deg C and than passing
them thru the fluxing and soldering.

I want to eliminate the Icicle problem and also remove the requirement of
baking.
Can you give me ideas.

regards

Sunil Gupta
Manager Process Engineering
Tata Telecom Ltd.

################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TechNet <your full name>
To unsubscribe:   SIGNOFF TechNet 
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################