TECHNET Archives

January 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0vpavW-0000W7C; Wed, 29 Jan 97 08:23 CST
Encoding:
9 TEXT
Old-Return-Path:
<[log in to unmask]>
Date:
Wed, 29 Jan 97 08:31:00 CST
Precedence:
list
Resent-From:
[log in to unmask]
From [log in to unmask] Wed Jan 29 14:
22:27 1997
Resent-Sender:
TechNet-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/9735
TO:
"'TechNet'" <[log in to unmask]>
Return-Path:
<TechNet-request>
Resent-Message-ID:
<"eQ0UG2.0.scM.rrrxo"@ipc>
Subject:
Thermal relief gap width
From:
"Wander, Nicholas G RV" <[log in to unmask]>
X-Loop:
[log in to unmask]
X-Mailer:
Microsoft Mail V3.0
Message-Id:
<[log in to unmask]>
Parts/Attachments:
text/plain (22 lines) 

Is a .005 inch gap width (the width of the "no copper" areas) for small   
thermal reliefs a problem? Can this be etched in 1 oz. copper without   
major difficulties?

Nick Wander
Printed Circuit Engineering
Unisys Corp.
Roseville, MN.

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2