TECHNET Archives

July 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0woTM4-000BkKC; Wed, 16 Jul 97 07:38 CDT
Content-Type:
text/plain; charset=ISO-8859-1
Old-Return-Path:
<[log in to unmask]>
Date:
Wed, 16 Jul 1997 06:46:52 -0600
Precedence:
list
Resent-From:
[log in to unmask]
Resent-Sender:
TechNet-request [log in to unmask]
>From willli Wed Jul 16 07:
39:07 1997
From [log in to unmask] Mon Jul 21 10:
21:49 1997
X-Mailing-List:
<[log in to unmask]> archive/latest/14035
X-MSMail-Priority:
Normal
X-Status:
Return-Path:
<TechNet-request>
Status:
O
X-Loop:
[log in to unmask]
TO:
"TechNet" <[log in to unmask]>
Content-Transfer-Encoding:
7bit
Resent-Message-ID:
<"_-1of3.0.AP6.R3Cpp"@ipc>
Subject:
Des: Tented Vias
From:
"Steve Collins" <[log in to unmask]>
MIME-Version:
1.0
X-Priority:
3
X-Mailer:
Microsoft Internet Mail 4.70.1155
Message-Id:
<[log in to unmask]>
Parts/Attachments:
text/plain (27 lines) 
When specifying "Tented Vias" in a design is it proper or desired to add a
note to the Fabrication drawing that states that there are "Tented Vias"
utilized in the design. I realize that it should be without question if
there is no pad on the soldermask A/W then the intent is to utilize "Tented
Vias". This to me seems to be asking for questions in the upfront PCB
engineering check if the majority of a companies designs do not employ
"Tented Vias". I also realize that IPC-A-600 deals with this but how do I
stop confusion or am I just being to careful. 

Any and all responses welcome this is becoming an issue here

Steve Collins
PCB Design Supervisor
Antec International
[log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2