TECHNET Archives

September 1999

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
TechNet <[log in to unmask]>
X-To:
Miguel Vallejo <[log in to unmask]>
Date:
Wed, 29 Sep 1999 09:32:05 -0400
Reply-To:
"TechNet E-Mail Forum." <[log in to unmask]>, "Joan M.Slade" <[log in to unmask]>
Subject:
Re: Exposed basis material
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset="iso-8859-1"
From:
"Joan M.Slade" <[log in to unmask]>
Parts/Attachments:
text/plain (20 lines) 
In regardes to exposed basis metal you have options.
Yes the metal needs to be covered. This is due to the potential for
corrosion.
You can flow solder onto the metal, "touch up" the solder mask, or apply
conformal coating to seal it.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2