Mime-Version: |
1.0 |
Content-Type: |
text/plain |
Old-Return-Path: |
|
Date: |
Wed, 25 Jun 1997 06:59:14 +0000 |
Precedence: |
list |
Resent-From: |
|
>From willli Wed Jun 25 01: |
49:17 1997 |
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Content-Disposition: |
inline |
X-Loop: |
|
Resent-Message-ID: |
<"6WwGM.0.DRD.SzBip"@ipc> |
From [log in to unmask] Wed Jun 25 10: |
55:25 1997 |
From: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wglsz-000BjMC; Wed, 25 Jun 97 01:49 CDT |
Subject: |
|
X-Mailer: |
Novell GroupWise 4.1 |
Message-Id: |
|
Parts/Attachments: |
|
|
HI Technetters
We are today measuring Cu thickness in PTH on line with a
instrument based on the Eddy current theori. But this instrument has a limit
when it comes to hole diameters below 0,8 mm (35 mils).
I know, that Caviderm can measure holes below 0,8 mm, but we need the
portability.
SO.... The big quistion is ... What are the options when looking fore an
portable Cu PTH thickness measuring device with the capability of
measuring cu thickness in holes with a diameter in the area of 0,4 to 0,8
mm (16 to 35 mils) ???
Looking foreward to here form you.
Thanks in advance !!
Lars Ladefoged Holm
Quality Engineering
Printca AS. Denmark
E-mail: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|