Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Tue, 3 Jul 2001 19:23:25 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Gentlemen,
I agree 100% with Graham Collins wording and attitude.
Avigdor
-----Original Message-----
From: TechNet [mailto:[log in to unmask]]On Behalf Of Graham Collins
Sent: Tuesday, July 03, 2001 5:34 PM
To: [log in to unmask]
Subject: Re: [TN] Rework/Repair
Rick
If you have not bonded it down I'd say it is neither!
But - if you have a lifted pad that you fix by bonding (say you work a bit
of epoxy in there before you push it down), I'd call that a repair. It may
look perfect, but the board is not exactly to print.
The definition we use here: if what you do brings the board to print
requirements, it's rework. If it fixes a problem and the board will meet
form/fit/function, but not to drawing, that's a repair.
regards
Graham Collins
Process Engineer, Litton Systems Canada, Atlantic Facility
(902) 873-2000 ext 6215
>>> [log in to unmask] 07/03/01 12:22PM >>>
Question: Let's say I have a pad that is slightly lifted and I'm able to
push it down. Is this considered Rework or Repair?
Thanks,
Rick Howieson
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
----------------------------------------------------------------------------
-----
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET
Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases >
E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
----------------------------------------------------------------------------
-----
---------------------------------------------------------------------------------
Technet Mail List provided as a free service by IPC using LISTSERV 1.8d
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt delivery of Technet send the following message: SET Technet NOMAIL
Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315
---------------------------------------------------------------------------------
|
|
|