Subject: Re: [DC] Question on Plated holes
>Ben, I have been where you are. Take some Kapton tape and put it over the
>via area that comes in contact with the metal part. Don't rely on solder
>mask to insulate between the two parts as solder mask can be scratched
>easily and flake off. Then you will have a short.
>
>Stephen Corke
>Sr. PWB Designer
>Optical Imaging Systems
>313-207-1274
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################