Subject: | |
From: | |
Date: | Thu, 1 May 1997 08:57:45 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Lucy..
The UV adhesive that I was referring to, is used primarily for
bonding jumpers to PWB's before conformal coating and after all wave
soldering. For wire tacking, a cure time of 4 to 8 seconds is required
utilizing a UV source with approx .17 watts/cm sq. intensity. I don't
have any info on shear strength, but I would assume that Dymax would
help you with any tech info that you require for their Multi-Cure 911
product. Hope this helps.
Regards,
Bob Vanech Bob
Norden Systems
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|