Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Wed, 6 Oct 1999 10:29:29 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
In a message dated 10/6/99 6:22:05 AM US Eastern Standard Time,
[log in to unmask] writes:
> I am not a total novice in this business, but I
> don't understand where you would use a temp.
> soldermask.
Bob,
Temp solder mask is used for wave solder when you have pads, holes or
other features that must be protected form solder contact. Sometimes the
reason for this is that a part is hand soldered to that location in a
subsequent process. I have used it for holes where screws or other mounting
hardware attach the assembly to a bracket, etc., and the mounting pad cannot
have any solder build up. I'm sure there are dozens of other similar
applications.
Jon Moore
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################
|
|
|