Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset=ISO-8859-1 |
Date: |
Fri, 10 Jul 1998 16:27:04 -0500 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
Sender: |
|
Comments: |
RFC822 error: <W> Incorrect or incomplete address field found and
ignored. |
Parts/Attachments: |
|
|
Rick,
You might want to try the CS600's they are faster and more reliable
but do not cut and clinch the leads. We use a mass lead trimmer to
cut the leads.
Gary Gartley
MSA
______________________________ Reply Separator _________________________________
Subject: [TN] Contact Systems CS-400C
Author: "TechNet E-Mail Forum." <[log in to unmask]> Rick Thompson
<[log in to unmask]> at cc_gate
Date: 7/10/98 1:13 PM
Does anyone have any experience, comments, etc. on Contact Systems CS-400C
Component Locator systems. We need to setup some low volume, small batch
through-hole jobs and would like to automate the process somewhat. The
CS-400C has been proposed to us by a couple of used-equipment vendors. Any
feedback on these units? Any other alternatives I should consider would
also be appreciated.
Thanks.
Rick Thompson
Ventura Electronics Assembly
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text
n the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for
ditional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700
t.312
################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC's web site (http://www.ipc.org) "On-Line Services" section for additional information.
For technical support contact Hugo Scaramuzza at [log in to unmask] or 847-509-9700 ext.312
################################################################
|
|
|