 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0v6gvs-0000VpC; Fri, 27 Sep 96 12:42 CDT |
| Content-Type: |
text/plain; charset=US-ASCII |
| Old-Return-Path: |
|
| Date: |
Fri, 27 Sep 1996 12:45:26 -0500 |
| Precedence: |
list |
| Resent-From: |
|
| Message-ID: |
|
| From [log in to unmask] Fri Sep 27 14: |
32:57 1996 |
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| X-Loop: |
|
| Content-Description: |
cc:Mail note part |
| Subject: |
|
| From: |
|
| Mime-Version: |
1.0 |
| Resent-Message-ID: |
<"RI8rz2.0.XzD.B81Jo"@ipc> |
| Content-Transfer-Encoding: |
7bit |
| Resent-Sender: |
|
| Parts/Attachments: |
|
|
Is anyone out there familar with Rogers 5880 teflon laminate? I am
processing a double sided board that comes out curled up when it exits
the reflow oven. The use of a fixture to hold the board flat during
the process and allowing it to cool in the fixture does not help.
When you try to straighten the board out the result is cracked chip
components. I would appreciate any help that you can give me with
this situation.
Shaun Dalton
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
