TECHNET Archives

July 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wswb9-000BkiC; Mon, 28 Jul 97 15:40 CDT
Content-Type:
text/plain; charset="us-ascii"
Old-Return-Path:
<[log in to unmask]>
Date:
Mon, 28 Jul 1997 22:45:38 +0300
Precedence:
list
Resent-From:
[log in to unmask]
Resent-Sender:
TechNet-request [log in to unmask]
MIME-Version:
1.0
X-Mailing-List:
<[log in to unmask]> archive/latest/14361
TO:
"'IPC TechNet'" <[log in to unmask]>
Return-Path:
<TechNet-request>
From [log in to unmask] Thu Jul 31 11:
42:50 1997
>From willli Mon Jul 28 15:
41:12 1997
Subject:
Re: "Delayed dalamination"
From:
Orna and Yehuda <[log in to unmask]>
X-Loop:
[log in to unmask]
Resent-Message-ID:
<"Q-EGW1.0.24I.MFGtp"@ipc>
Content-Transfer-Encoding:
quoted-printable
Message-ID:
<[log in to unmask]>
Parts/Attachments:
text/plain (26 lines) 
Hi,
First off all, I'd like to thank Andy for his explanation. The idea seems interesting, however I'll need a bit of time to think it over. Any other comments will be welcome.

I have tried to bake the boards according to Bill's idea, however the measling/delam. remained the same.

I must emphasize that I see the failure WITHOUT processing the boards.
Just taking them from storage shows the delam. on the preprocessed bare boards. There is no need to reflow/wave solder them in order to see the failure. 


    ************************************* 
    *          Yehuda E. Weisz              
    *  e-mail: [log in to unmask]
    *  Tel: 972-3-5240362                    
    ************************************

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2