Frederick A Martin wrote:
> Technet,
> I am not a Designer so excuse me if there is a simple
> answer to this.
> 2 Tracks - side by side on a PCB - FR4 epoxy material
> 8KV running through 1 track
> How far does the 2nd track have to be to have less than
> 300mA induced current ?
Unless you've already gotten an one, I don't think this
is an easy question to answer. But, I'll try.
First some questions...
How is track #2 terminated - high resistance or low resistance?
What's the current through track #1?
I'm assuming the tracks are on the outside of the top or
bottom layer of the pcb - they are not buried?
************************************************************
------------------------------------------------------------
The comments and opinions stated herein are mine alone,
and do not reflect those of my employer.
------------------------------------------------------------
************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************