TECHNET Archives

October 1999

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Matthew Park <[log in to unmask]>
Reply To:
TechNet E-Mail Forum.
Date:
Mon, 18 Oct 1999 13:16:27 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (22 lines)
What would be a best way to cool boards exiting from a reflow oven prior to printing the other side in a continous double side SMT assembly process?

Typical board tempeature is 100'c to 80'c afther exiting oven and it required to cool down to room temp (30'c / below) before processing the other side.

who are some of conveyor vendors who has experienc making such a cooling unit?

Matthew Park

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in
the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
information.
If you need assistance - contact Gayatri Sardeshpande at [log in to unmask] or
847-509-9700 ext.5365
##############################################################

ATOM RSS1 RSS2