Subject: | |
From: | |
Reply To: | |
Date: | Thu, 7 Jul 2011 21:46:22 +0300 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Good decision,
Checking them separately will show if the ENIG acting as a cathode.
*
*
*Reuven
*
On Thu, Jul 7, 2011 at 9:12 PM, Pete <[log in to unmask]> wrote:
> Here's photos:
>
> http://ipc-technet.groupsite.com/gallery/20543
>
> And it does appear mostly at the stressed points of the shield. There is
> also a good bit of it on the Zinc-galvanized hardware, and the galvanized
> and powder coated Chassis inside corners. Plain steel hardware is rusted.
>
> The chassis lid is sealed with a metal/foam gasket. No corrosion at all
> there. There is some rust where the gasket contacts the untreated steel lip
> of the chassis.
>
> We're going to run temp/humidity testing on the board and shield by
> themselves, not in the assembly.
>
> Pete
>
> ---------------------------------------------------
> Technet Mail List provided as a service by IPC using LISTSERV 16.0
> To unsubscribe, send a message to [log in to unmask] with following text in
> the BODY (NOT the subject field): SIGNOFF Technet
> To temporarily halt or (re-start) delivery of Technet send e-mail to
> [log in to unmask]: SET Technet NOMAIL or (MAIL)
> To receive ONE mailing per day of all the posts: send e-mail to
> [log in to unmask]: SET Technet Digest
> Search the archives of previous posts at: http://listserv.ipc.org/archives
> For additional information, or contact Keach Sasamori at [log in to unmask] or
> 847-615-7100 ext.2815
> -----------------------------------------------------
>
--
Best Regards,
*Reuven Rokah*
Mobile: 972-52-60-120-18
Tele-fax: 97239360688
<http://www.rokah-technologies.com/>[log in to unmask]
[log in to unmask]
www.rokah-technologies.com
**
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 16.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
For additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|
|
|