It is truly ironic that every labor union member who told me the oft
quoted phrase "They're taking the food out of our mouths!" was
overweight to the point of obesity. This includes the four years I
spent as an unwilling member of the teamsters' union.
Q: Why does the Teamsters' union have a horsehead on its official logo?
A: Because the horse is able to sleep while standing up.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Joe Fjelstad
Sent: Sunday, November 23, 2008 11:20 PM
To: [log in to unmask]
Subject: Re: [TN] A Modern Parable (NTC)
That is a sobering story but the roots of the problem seem to go back
many
years.
I worked on an American automobile assembly line the summer after high
school in the 60s. Breaks were mandatory and boring for me. The first
(and last)
time I tried to go back to work early from a break I was threatened by
others
on my line. The wages were excellent and I needed the job so I did not
buck
the system but it still felt somehow wrong.
It is dissapointing that the American (aka Protestant) work ethic can
be and
has been undermined in some unions. That said, unions played an
important
role at one time in the US and elsewhere and they still have importance
in some
regions to prevent abuse of the workers but they are now two edged
swords
that can cut both ways and sometimes (too often?) are blinded to
enlightened
self interest with the results as is now coming into evidence.
And so it goes...
Joe
In a message dated 11/22/2008 1:25:07 P.M. Pacific Standard Time,
[log in to unmask] writes:
A number of years ago, I visited the GM assembly plant in Janesville,
WI. I
work for a small OEM and my job that day was to upgrade about 35
broadband
devices scattered about the factory and assembly line. I was working
with an
on-site contractor (non-union) who had worked at this plant for 5
years. The
job entailed driving in a golf cart to each device, shutting it down,
opening
it up, replacing a plug-in PA, closing the unit and powering it up
again. It
might have taken maybe 2 1/2 hours to do the whole job, but because of
three
letters (UAW) it took more than 9 hours.
The rules said that we needed to have a union "electrician" with us at
all
times- for the sole purpose of removing /attaching the screw-on 'F'
broadband
connector on the modem. During those 9 hours, I saw our assigned
'electrician' twice- each time for a few minutes, both times he was
inebriated and
smelled strongly of gin. As I travelled through the plant, every
fourth person I
saw on the line was either asleep in a chair, eating or reading a
newspaper.
This also included supervisors. Every hundred feet or so was an open
'break area' consisting of a coffeepot and a TV set aimed so that the
workers
could watch it from their work stations- each one tuned to a soap opera
or talk
show. I saw workers jamming and forcing parts together, and throwing
their
food crumbs and trash into the vehicles as they worked on the line. I
wondered why the contractor made my wear a hard hat in the building,
but
the mystery was solved when the occasional small part (nut, bolt,
bracket or
block of wood) came flying in our general direction from the assembly
line as
we drove along. Some workers had pretty good aim, as there were some
direct
hits. Once I left my tool bag unatended in our cart, and it took 10
minutes
to find it - stuffed into a trash can about 50 feet from where I had
left
it.
I saw almost every foot of assembly line in that factory, from the
chassis
assembly to the paint shop, to final assembly and Q.C. and I will tell
you now
that 1/3 of the money you spend for a brand new GM truck goes to pay
for
inefficency and waste. It cured me of ever wanting to buy a brand new
car or
truck. I am not surprised that GM is closing the Janesville plant. I
see no reason for the government to 'bail out' an inherenty bad system.
IMO the whole American auto industry needs to be dismantled and rebuilt
from
the ground up.
-----Original Message-----
From: TechNet on behalf of Bev Christian
Sent: Sat 11/22/2008 11:47 AM
To: [log in to unmask]
Cc:
Subject: Re: [TN] A Modern Parable
Inge,
Read an interesting article in the last couple of days. It was
comparing the
U s car situation with what happened to the British car industry. There
when
things got bad they amalgamated them all into British Leyland, things
continued to deteriorate, the Brit gov pumped in umpteen millions of
taxpayers
money, the company needed yet more, then the Brit public said enough is
enough
and it was sold off picemeal - Jaguar, Rover, Austin minis, etc. They
are now
owned by the Germans, Chinese and Indians, but cars are still being
made in
England. Are we about to repeat history?
Bev
----- Original Message -----
From: TechNet <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Sent: Sat Nov 22 12:39:03 2008
Subject: Re: [TN] A Modern Parable
GM and Ford reminds of a big boa constrictor which swallowed an entire
cow and is hence so heavy, slow and immobile, that it can do nothing
when the big caterpillar comes roaring, Let's hope that the later runs
out of petrol, and that the former will finally wake up after a long
digestion, also that he learnt that it's far better to eat many small
portions and remain fast and strong. I have a feeling that the roles
will shift. If the japanese appetite goes on like today, THEY will be
the big fat one and will not be fast enough to run when a new scenario
suddenly forms. What this could be, I've no idea, but maybe the american
car makers at that time have the best conditions of the two. (Myself, I
don't like Toyota cars. They are good, no doubt, but they are too
'plasty' and reminds more of large scale Dinky Toys than real cars.).
Yesterday, I saw a one hour movie about Ronald Reagan. Wow! I mean N/S
RR. I would like to spend one day onboard that carrier. Not to see
nuclear weapons, guns and missiles, but to see the engines, the steam
catapults, the large elevators, the kitchens, see the enormous radar
equipments, see how 5,000 people can live on a boat etc. Just wonder if
NG are planning another one, because Ronald Reagan was designed 20
years ago. She (he?) is built for working another 30 years. The cost was
20 billions USD. It's all crazy of course, but I can't help being
speechless when I see such creations.
Inge
----- Original Message -----
From: "Ian Hanna" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, November 21, 2008 1:17 PM
Subject: Re: [TN] A Modern Parable
Why not assume that the car companies themselves are designed and built
with attention to design detail and quality of execution that
corresponds to their respective vehicles...perhaps a more robust
design is in order
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Syed Ahmad
Sent: Friday, November 21, 2008 3:56 PM
To: [log in to unmask]
Subject: Re: [TN] A Modern Parable
Mitt Romney wrote in yesterday's NYT about the $2k extra labor cost.
But why the US automakers cannot compete in the cars which they build
offshore with equivalent Japanese cars built on-shore?
Should $2k make much difference anyhow when people on the street are
sold on monthly payment and not on the price of the vehicle?
American automakers have the advantage that many Americans buy
American-made otherwise their sales could be even lower.
Someone on NPR was saying that Japanese have much less number of
dealers so they can weather ups and downs better.
25 billion can buy 1 million $25k autos and 2 million $12k autos. Any
number in between the two should cover all employees of IPC members
companies and their friends. Only thing we need is a private jet for
the TechNet webmaster to go to DC and lobby.
-----Original Message-----
From: TechNet [mailto:[log in to unmask]] On Behalf Of Pete Houwen
Sent: Friday, November 21, 2008 12:03 PM
To: [log in to unmask]
Subject: Re: [TN] A Modern Parable
It goes beyond the UAW for sure, but an interesting number:
Hourly North American labor cost, GM: $81
Hourly North American labor cost, Toyota: $35
There's about $2K extra in every GM (Ford, Chrysler) car for labor.
All else being equal, consumers will spend $2K less. So, Detroit needs
to cut corners, and still sell small cars at a loss just to compete,
meaining they need to sell more high margin SUVs (still at that
disadvantage with more cut corners) to make up for it. So some of
those poor decisions and lowered quality are
effectively a matter of unmanageable labor costs.
And considering you can't incentivize the workers by firing the bad
ones and
promoting the good ones, all you have are inspirational posters.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
or
(re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or 847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------------------------
This transmission (including any attachments) may contain confidential
information, privileged material (including material protected by the
solicitor-client or other applicable privileges), or constitute
non-public information.
Any use of this information by anyone other than the intended recipient
is
prohibited. If you have received this transmission in error, please
immediately
reply to the sender and delete this information from your system. Use,
dissemination, distribution, or reproduction of this transmission by
unintended
recipients is not authorized and may be unlawful.
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt
or (re-start) delivery of Technet send e-mail to
[log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to
[log in to unmask]: SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16
for additional information, or contact Keach Sasamori at [log in to unmask]
or
847-615-7100 ext.2815
-----------------------------------------------------
**************One site has it all. Your email accounts, your social
networks,
and the things you love. Try the new AOL.com
today!(http://pr.atwola.com/promoclk/100000075x1212962939x1200825291/aol
?redir=http://www.aol.com/?optin=new-dp
%26icid=aolcom40vanity%26ncid=emlcntaolcom00000001)
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0 To
unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or
(re-start) delivery of Technet send e-mail to [log in to unmask]: SET
Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the
posts: send e-mail to [log in to unmask]: SET Technet Digest Search the
archives of previous posts at: http://listserv.ipc.org/archives Please
visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for
additional information, or contact Keach Sasamori at [log in to unmask] or
847-615-7100 ext.2815
-----------------------------------------------------
---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------
|